Provider for all kinds of luxury shell mosaic tiles products

Shell Mosaic production how to fill the gap after installation on the wall?

by:HIYOSENCE     2021-01-22
Shell Mosaic production how to fill the gap after installation on the wall?
before the shop is stuck in whitewater mud thin swings once, then use cement on a thin shell Mosaic caulking, adding glue, and evenness of shell Mosaic on the vertical as soon as possible the shop is stuck prison and shoot on the wall.
with oily caulking agent to fill gaps in shell Mosaic
cloth wipe excess cement and mucilage on the surface of shell Mosaic.

1, the need to stick a face should be strong, clean the oil wax stains. For ever use the surface of paint should be done to promote cut, exposed to at least 80% of the original surface.
2, when the shop is stuck in order to avoid the scratch of shell Mosaic, shell Mosaic with dust sundry friction.
3, the shop is stuck with glue powder materials it is best to use ceramic tile or marble glue powder, glue powder color should be white, use other miscellaneous color material can affect the color of shell Mosaic.
4, construction pulp white glue daub metope first, reoccupy type 6 * 6 teeth scraping board group into uniform dentate, then mucilage allows air buy time to press the shell Mosaic knead in the can. When the shop is stuck, should pay attention to the vertical. If found to have individual shell Mosaic with slanting piece, can make one by one in front of the mucilage solidification grain mobile correction.
5, when ceramic tile adhesive for about 24 hours after solidification, shell Mosaic caulking. Shell Mosaic of seam available color caulking glue to do their favorite fill the gap. Application in caulking rubber ash knife joint sealant completely pressed into the cracks, shall not be left blank. Caulking work is completed, immediately with a damp towel or sponge to shell Mosaic surface clean.
6, shell Mosaic must be cut, you should use high quality diamond glass cutter for cutting on glass surface.
7, when the hole on the shell Mosaic, should use a special tool, drilling to add water to cool.
8, in order to maintain the luster of the shell Mosaic, cannot use abrasive cleansers, steel wire brush and clean sand paper, using household cleaning supplies to wash the Windows.
shell Mosaic paste installation, can be the same as other types of Mosaic paste ( Such as glass, stone, etc. ) 。 With a mixture of white cement and glue paste, or directly with ceramic binder etc, then wipe clean can.






Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...